30
Operation | Special Features
UNIDEN XTRAK 50 Series
Handheld UHF-CB Transceiver
Setting up Master Scan Mode
First, Setect a G.S Memory Preset to use as the Master Scan chan-
nel group.
P- No Change Master Scan with the current Group Scan (GS) memory.
P1: Master Scan with CH 09-20 loaded into GS memory.
P2: Master Scan with CH 21-30, 39, 40 loaded into GS memory.
P3: Master Scan with CH 49-60 loaded into GS memory.
P4: Master Scan with CH 61-70, 79, 80 in GS memory.
1. Press
[MENU]
and then
press
[
]
or
[
]
until
08 GS Mem. Preset
is highlighted.
2. Press
[MENU]
to select.
3. Press
[
]
or
[
]
to change the setting to a Master Scan option.
4. Press and hold
[MENU]
to save & exit from the menu mode.
NOTE
The Presets (1-4) make it easier for all radios to select a
common setting. If you choose to use MASTER SCAN with
the current GS channel memory (P- No Change), you need
to make sure all other radios in your network have the same
channels stored in GS memory. To add/remove channels
from G.S SCAN Memory, refer to page 22.
NOTE
RX only Channels (CH22, CH23, CH61, CH62 and CH63)
and Emergency Channels (CH05, CH35) will not be
included in Master Scan Mode even though stored into GS
Memory. Also channels for which Duplex Setting is On will
be skipped in Master Scan Mode.
Second, Select a Master Scan subcode
1. Press
[MENU]
and then press
[
]
or
[
]
until
09 M.Scan Code
is
highlighted.
2. Press
[MENU]
to select.
3.
Press
[
]
or
[
]
to select a CTCSS or DCS code.
4. Press and hold
[MENU]
to save & exit from the menu mode.
XTRAK 50_50PRO OM_r7.1.indd 30
XTRAK 50_50PRO OM_r7.1.indd 30
11/06/2021 07:12:41
11/06/2021 07:12:41
