17
using the phonebook
The base can store up to 200 entries in its phonebook. All handsets share the same
phonebook, so only one handset can access it at a time.
To...
Press...
open/close the phonebook
Press
MENU/OK
and select
Phonebook
and press
MENU
scroll through the entries
DOWN
to scroll through the entries from A to Z.
UP
to scroll from Z to A.
jump to entries that start with a
certain letter
the number key corresponding to the letter you
want.
dial the current entry
TALK/FLASH
or
SPEAKER
.
edit the current entry
MENU/OK
, then select
Edit
.
delete the current entry
MENU/OK
, then select
Delete
. To confirm, select
Yes
.
To add a new phonebook entry (with the phone in standby), open the phonebook. Press
MENU/OK
and select
Create New
. Enter a name and number, then select a personal ring.
To add the current number to the phonebook, press
MENU/OK
and select Store into Pb.
The Edit Name screen displays. Edit the information.
•
Enter the phone number (up to 32 digits) exactly as you would dial it.
•
If you need to enter a pause between the numbers, press
REDIAL/PAUSE
; you’ll see
P
in
the display. (The dialing will pause for about 3 seconds per a digit.)
•
To edit the number, press
END/CLEAR
or
MUTE/DELETE
to back up the cursor and delete
numbers. Re-enter the correct numbers.
adding/editing phonebook entries
Deleting all the phonebook entries
With the phone in standby, open the phonebook. Press
MENU/OK.
Select
Delete All
. To
confirm, select
Yes
.
Chain Dialing
If you often have to enter a series of digits or a code number during a call, you can save
that code number as a regular phonebook entry and use the phonebook to send the
code number.
1. Make your call normally. When you hear the prompt that asks you to enter your code
number, open the phonebook and find the entry.
2. Press
MENU/OK
to send the code. If you change your mind, just close the phonebook.
