5
If...
Try...
you don't hear a dial tone
-
the display says
-
Registration
Failed
Making sure the handset is fully
charged, then trying again.
Using the Belt Clip
To attach the belt clip
Line up the holes on each side of the handset. Insert the belt clip into
the holes on each side of the handset. Press down until it clicks.
To remove the belt clip
Pull either side of the belt clip to release the tabs from the holes.
Important Information
Because the handset adapts to the base, the exact features and
operation of the handset will vary slightly depending on which
base you register the handset to. Refer to the owner's manual for
the base you're registering the handset to for feature descriptions.
All features and operation for the handset are described in the
owner's manual for one of the bases listed under the
Compatible
Bases
section.
Owner's manual for all Uniden phones are available on our
website for free downloading.
Specifications
AC Adapter
Part number
Input Voltage
Output Voltage
AAD-600S(M)
240V AC, 50 Hz
9V DC @ 210mA
Battery pack
Part number
Capacity
BT-694n
400mAh
Use only the supplied AC adapters.
Be sure to use the proper adapter for the base and any chargers.
Do not place the power cord where it creates a trip hazard or
where it could become chafed & create a fire or electrical hazard.
Do not place the unit in direct sunlight or subject it to high
temperatures.
XDECT SSE05 OM 5
22/9/11 2:22:31 PM