4
registering to a Base
The accessory handset won't work until you register it to a base!
Compatible Bases
This handset is designed for use with Uniden's XDECT SSE25 and
XDECT SSE27 Series bases.
Other compatible Uniden bases include the DECT 2015, DECT 2035,
XDECT 7015 and XDECT 7055 models. Some features may not be
available when using the XDECT SSE05 with these other bases.
For the most up-to-date list of which bases this handset is compatible
with, see our website.
registration Methods
There are three different registration methods, but it's easy to figure
out which one applies to your handset and base. Answer the two
questions to register the handset to one of the compatible bases.
Does the handset fit in the base cradle?
Yes Place the handset in the base. The display should say
Handset
Registering
.
No
Does the base have an LCD display?
Yes
On the base, open the menu and select
1.
Register Handset
.
The display should say
Handset Registering
.
On the handset, press and hold
2.
HASH (#)
until the handset
display says
Handset Registering
(about 2 seconds).
No
Disconnect the base AC adapter.
1.
On the base, press and hold
2.
FIND
while you reconnect the
adapter.
On the handset, press and hold
3.
HASH (#)
until the display
says
Handset Registering
(about 2 seconds).
After about 30 seconds, the handset display should say
Registration Complete
.
Test the connection
Pick up the handset and press
TAlk
. Make sure you get a dial tone.
(Press
TAlk
again to hang up.1
XDECT SSE05 OM 4
22/9/11 2:22:31 PM