Uniden XDECT 8355 Series, Руководство пользователя

Страница: 40 / 56

40
Intercom
•
Whenever the phone is in standby, you can make an intercom call
between handsets without using the phone line.
• You can make an intercom call from any handset, but only two handsets
can be in an intercom call at any time.
• If an outside call comes in during an intercom page, the phone cancels
the page so you can answer the incoming call.
•
If an outside call comes in during an intercom call, press
HOME/FLASH
or
MOBILE
, depending on which line is ringing, to hang up the intercom
call and answer the outside call.
To Press
make an intercom
page
Press MENU/SELECT and choose Intercom from
Handset or press INTERCOM/FIND HS on the
Base. Select the handset/base you want to talk
with, or ALL to page all handsets at the same time.
cancel a page END/CLEAR
answer a page HOME/FLASH
end an intercom call END/CLEAR . Both handsets return to standby.
If you subscribe to a voice mail service, your phone can notify you when
you have a new message. This feature supports Frequency-Shift Keying
(FSK) notification. Contact your voice mail provider for information.
When you have new messages, the display shows a message icon and
the charge LED on the handset blinks. To access your voice mail, press
MESSAGE/MUTE
and select Voice Mail .
#
When you select Voice Mail , you will be prompted to enter a Voice
Mail Access number if you have not yet set one up (see page 24). If
you have already set one up, your phone will dial it.
After you listen to all your messages, the message icon turns off and the
charge LED on the handset stops blinking. If it doesn’t, you can reset
it: With the phone in standby, open the menu and select Global Setup ;
select VMWI Reset , then select Yes .
Voice Message Notification
answer a call transfer
page
Press HOME/FLASH . You can speak to the
transferring handset.
To speak to the outside caller,
Press
HOME/FLASH
again.
Press
MOBILE
.