Uniden XDECT 8355 Series Скачать руководство пользователя страница 17

Страница: 17 / 56

BLOCK

While the phone is ringing: add the incoming caller

ID to the call block list (block the call).

FIND HANDSET/

INTERCOM

•

In standby: page a handset using the intercom.

•

During a call: put the call on hold & start a call

transfer.

MENU/SELECT

•

In standby: open the menu.

•

In the menu or any list: select the highlighted

item.

DO NOT DISTURB

In standby, press and hold to turn the Do Not

Disturb feature on or off (see page 37).

PLAY/STOP

•

In standby: start playing messages.

•

While a message is playing: stop playing

messages.

•

In the menu or a list: exit the menu completely.

PHONEBOOK/

LEFT

•

In standby or during a call: open the

phonebook.

•

In any menu or list: go up one level. (If you are

already at the top level, the phone exits the

menu and returns to the previous operation.)

•

During text entry: move the cursor to the left.

•

While playing messages: for the first 2

seconds, go to the previous message; after

that: go to the start of this message.

CALLER ID/RIGHT

•

In standby or during a call: open the Caller ID

list.

•

During text entry: move the cursor to the right.

•

While a message is playing: skip to the next

message.

( )

•

In standby: increase the ringer volume.

•

During a speakerphone call or while a

message is playing: increase the speaker

volume.

•

In the menu or any list: move the cursor up one

line.

DOWN

( )

•

In standby: decrease the ringer volume.

•

During a speakerphone call or while a

message is playing: decrease the speaker

volume.

•

In the menu or any list: move the cursor down

one line.

Содержание XDECT 8355 Series

























































Результаты поиска

Содержание XDECT 8355 Series

Отзывы:

Бренды по названию

Популярные бренды

Uniden XDECT 8355 Series, Руководство пользователя

Результаты поиска

Содержание XDECT 8355 Series

Отзывы:

Бренды по названию

Популярные бренды