[ 39 ]
ADDITIONAL
INFORMA
TION
CHANGING THE DIGITAL SECURITY CODE
The digital security code is an identification code used to connect the handset and the
base unit. Normally, setting the code is not necessary. In the rare situation that you
suspect another cordless telephone is using the same security code, you can change the
code. To change the digital security code:
1. Perform the “System Reset” menu options (“Deregister the Handset” and
“Deregister the Base Setting”) for the handset you have (see page 19).
2. To register the handset do the following steps:
1) Place a handset in the base.
2) Registration starts automatically.
While registering “
Handset Registering
” appears in the display.
3) When the registration is complete, “
Registration Complete
” appears in
the display.
If the registration fails, “
Registration Failed
” appears in the display. Try the steps
above again.
UP306EH (WDECT2310) ENG OM 1/21/04 8:53 AM Page 39
All manuals and user guides at all-guides.com