background image

[ 12 ]

Most of the handset settings are set from the menu. The menu has 4 main menus
(

DirectLink Mode, Handset Setup, Global Setup, and System Reset

) and 

submenus respectively. 

Summary of the Main Menu and Submenu 

ABOUT THE MENU

Handset Setup

Submenu name

Description

Edit Voice Mail

Program or delete the voice mail access number (see page 15).

Ringer Volume

Adjust the ringer volume (see page 15).

Ringer Tones

Adjusting the ringer tone (see page 16).

Distinct. Ring

Set the distinctive ring (see page 16). “Distinctive Ring” allows you to

(Distinctive ring)

preset memory locations with a designated ring tone. When an incoming call 
is received and the Caller ID information matches the information in one of 
the memory locations, the distinctive ring that has been stored for that 
particular Caller will sound.
If you have set multiple memory locations with distinctive rings, 
switching the setting to “Distinctive Off” will result in no distinctive ringing. 
All incoming calls will have a normal ring tone. Switching to “Distinctive On” 
will activate all programmed distinctive ring memory locations.

• For Global Setup and

System Reset
(Deregister HS)
menu, make sure the
line is not in use,
and the handsets are
within the range
limits of the base.

• Direct Link feature is

not functional on
this model.

UP306EH (WDECT2310) ENG OM  1/21/04  8:51 AM  Page 12

All manuals and user guides at all-guides.com

Содержание WDECT 2310





















































Отзывы: