Uniden VP300, Руководство пользователя

Страница: 104 / 141

77/114
saving command by click [Save]. [Note Information] page will be seen which means saving
successfully. And the system will be restarted, please wait for a while
7.4 MAC Clone Setting
7.4.1 Function
You could enable / disable the MAC Clone setting.
7.4.2 Instruction
Figure MAC Clone Setting (VoIP Gateway only)
MAC Clone Default: OFF. When setting ON, Mac Clone function will be active.
Submit [Button] Submit the change.
Reset [Button] Clear the change.
7.4.3 Operate Instruction
Step 1: Please make sure that LAN Mode is NAT Mode, and your PC is connected to LAN Port, and
using LAN to enter page: ( http://192.168.123.1:9999 )
Step 2: On the main page, select [System

MAC Clone Setting], enter [MAC Clone Setting] page,
after revising the information (e.g.: MAC Clone: on) (See Figure 1), click [Submit].
(Figure 1)
Step 3: The following information will be found (See Figure 2) Please click [Submit].
(Figure 2)
Step4: The following information will be found (See Figure 2) Please click [Submit].
(Figure 3)
Step 2: After saving change, enter [Note Information] page, “Note Information” will be seen, then
the changing will come into effect.