34
•
WHAM
- Lets you select and work with WHAM options. See “Using the WHAM and WHAM
x 4 Sub Menus” on Page 41.
•
SCRAMBLE
- Lets you select and work with scrambler options. See “Using the Hailer
Rename Option” on Page 43.
•
WHAM PAGE
- Lets you select and work with WHAM page options. See “Using the WHAM
Page Sub Menu” on Page 43.
Using the Initialize Sub Menu
The radio's initialize menu lets you set up the radio’s options and parameters. To set these
parameters, press and release
PUSH/SELECT
then rotate the knob to
SETUP
and push to
select it.
Rotate
the knob to
INITIALIZE
, then press
PUSH/SELECT
to select it.
Setting Up a User MMSI
When you first turn on the radio or select this option, you must program a user MMSI. A user
MMSI is 9 digits in length.
Important
: If you have already set the user MMSI,
DO NOT CHANGE IT
unless you have
received a new user MMSI. After you program a user MMSI for the first time, you can only
change it once more. If you try to change the user MMSI a third time, the radio will not
accept the change. To change the user MMSI again, you must return the radio to Uniden for
reprogramming.
3. Quickly press and release
PUSH/SELECT
. A screen appears containing options you can
select to work with the radio's features.
4. Rotate
PUSH/SELECT
to select
SETUP
, then press
PUSH/SELECT
to select it.
5. Press
PUSH/SELECT
to select
INITIALIZE
.
6. Rotate
PUSH/SELECT
to select
USER MMSI
, then press
PUSH/SELECT
to select it.
7. If a user MMSI has already been programmed once or twice, it appears on the screen.
Stop
here
.
8. Otherwise, if a user MMSI has not been programmed, the first digit of the blank user MMSI
is reversed in black and white..
9. To enter the first digit of the user MMSI, rotate
PUSH/SELECT
until the digit appears, then
press
PUSH/SELECT
. The digit you entered appears on the display and the reversed black
and white cursor moves to the next position.
10. Repeat Step 9 for each of the user MMSI's digits.
11. If the displayed user MMSI is correct, rotate
PUSH/SELECT
to select
YES
, then press
PUSH/SELECT
to confirm it. The setup menu appears.
12. Otherwise, If the displayed user MMSI is not correct, rotate
PUSH/SELECT
to select
NO
,
then press
PUSH/SELECT
to confirm it. Then repeat Steps 6 through 11 to enter the correct
user MMSI.
Using the Setup Screen
Содержание UM625C
Страница 1: ...UM 525 MANUAL OWNER S Marine Radio...
Страница 60: ......
