20
Using Step
Step lets you quickly tune through the channels you saved in the radio's memory. To use step,
repeatedly press
STEP/SCAN
. The radio tunes a channel you stored in memory each time you
press
STEP/SCAN
.
Using Hail
Note: You must connect one or two optional hailer horns to the radio to use the hail feature.
To enable the hail feature, press
HAIL/INTERCOM
. A selection screen appears. Then select
the hailer you want to use (Hailer 1, Hailer 2, or both ) then press
PUSH/SELECT
to select it.
Next, press
PTT
to speak.
appears. Release
PTT
to listen. LISTEN ÿ appears. You
hear any response to your hail through the radio's speaker.
To adjust the hail outgoing volume, repeatedly press
or
on the microphone or rotate
PUSH/SELECT
on the radio. To exit hail, press
HAIL/INTERCOM
again.
Using the Intercom
The intercom feature lets you call optional WHAM x 4 microphones connected to the radio.
You can select and call one microphone, or individually add each of several microphones to a
temporary group using the Intercom Menu, or each microphone connected to the radio.
Notes:
•
You cannot use a WHAM wireless microphone to use the intercom.
•
WHAM x 4 microphone users can also call each other and the radio.
•
If the WHAM x 4 microphone user cannot connect with the radio, the intercom feature does
not work and the radio sounds an error tone.
•
Intercom mode is cancelled if
16/9 TRI
or
DISTRESS
is pressed.
Follow these steps to use the intercom.
1. Hold down
HAIL/INTERCOM
for about 2 seconds.
2. Follow one of these steps to select one or all WHAM x 4 microphones connected.
a. To select one WHAM x 4 microphone, rotate
PUSH/SELECT
until the WHAM x 4
microphone you want to talk to is highlighted on the INTERCOM screen then press
PUSH/
SELECT
to select it.
b. To create a temporary group of WHAM x 4 microphones, rotate
PUSH/SELECT
and
select
e
ach mic listed. Rotate
PUSH/SELECT
and press the knob to add it to the group. A
check
icon appears for that mic.
c. To select all the connected mics, rotate the
PUSH/SELECT
until ALL is highlighted. Press
the knob to select all the mics.
d. To call each microphone instead of all, rotate
PUSH/SELECT
to select
CALL
, then press
PUSH/SELECT
to select that mic. A
check
icon
appears next to the selected mic on the
radio’s display and each selected microphone sounds an audible tone. When you select
CALL and press
PUSH/SELECT
, you call another checked WHAM x 4 mic.
TALK
Basic Operation
LISTEN
Содержание UM625C
Страница 1: ...UM 525 MANUAL OWNER S Marine Radio...
Страница 60: ......
