E-23
Using Your Radio
To delete the FIPS code, select
Delete
. To edit the code, select
Edit
,
then use the
CHANNEL UP
and
CHANNEL DOWN
buttons to change each
of the six digits.
When you are satisfied with the list of FIPS codes, select
Exit
to close
the menu screen.
8.
9.
Changing display and sound options
Contrast
The UM425 display has 10 levels of contrast. To adjust the contrast, press
the
MENU-PA
while the radio is idle. Select
System
and then
Contrast
. Use
the
CHANNEL UP
and
CHANNEL DOWN
buttons to change the contrast to your
desired level.
To restore the default contrast setting, turn the radio off. Press the
MENU-PA
button and hold it in while you turn the radio on.
Lamp adjust
The UM425 has 10 brightness levels on the display. To adjust the brightness,
press the
MENU-PA
button while the radio is idle. Select
System
and then
Lamp Adjust
. Use the
CHANNEL UP
and
CHANNEL DOWN
buttons to change the
brightness to your desired level.
Turning the key beep on and off
Key beep is the tone that sounds when you press a key or a button. To turn
off the key beep, press the
MENU-PA
while the radio is idle. Select
System
and
then
Key Beep
. Choose
Off
to turn off the key beep.
Setting the GPS position manually
If the radio is not receiving valid GPS data, the radio displays Input Position.
Follow the steps below to manually input your position.
NOTE: Be certain any manually-entered position is correct. If you enter the
wrong position and then make a DSC distress call, you will be telling the
Coast Guard to look in the wrong place.
Use the up and down
arrows to adjust each of
the values in turn.
16
--/-- 11:22U
---
o
--.- KT
35
o
4
0.610 N
139
o
46. 564 E
MENU
Setup
SELECT
GPS Setup
SELECT
Position Set
SELECT