Normal mode with both Weather Alert and Triple/Dual Watch
You can activate Weather Alert Watch and Triple/ Dual Watch at the same time. The radio
performs both checks at their scheduled time.
wx
WX Alert :
Every 7 seconds,
the radio checks the most
recently-used weather channel.
09 16
09 16
09 16
Triple Watch:
Every 2 seconds,
the radio checks channels 9 & 16.
Monitoring Channel 25
Scan Mode
You can save channels into memory and then use scan mode to monitor those channels.
When the radio detects a signal on a channel, it pauses on that channel as long as the signal
is received; when the transmission stops, the radio will continue scanning.
11
10
08
13
12
17
15
20
14
The radio scans about
5 channels in 1 second.
When it detects a signal, the radio stays on the
channel until you press the
CHANNEL
UP
button or the
signal stops.
Resume scan
In scan mode, you can get the following information from the display (some indicators will
not always be displayed).
1 Watt
USA
Memory
Scanning Channels
01A,05A,06,07A,08
07
A
Transmit power
last used
Channel mode
(
USA
,
CAN
adian,
or
INT
ernational)
Current channel
being scanned
Scan list (if the
text is too long,
the line scrolls)
All scanned
channels must
be in memory
Normal scan
mode or Triple/
Dual-watch on
Status
icons
Using the radio in scan mode
x
You cannot transmit while in scan mode.
x
You must have two or more channels in memory to start a scan.
x
To save a channel into memory, select the channel, then press and hold
WX-MEM
for
two seconds. Memory will show on the display.
x
To remove a channel from memory, set the radio to that channel, then press and hold
WX-MEM
for two seconds. Memory will no longer show on the display.
x
To activate scan mode, press and hold
CLR-SCAN
. Press and hold
CLR-SCAN
again to
return to the previous mode.
x
When the radio automatically stops on a channel, press
CHANNEL UP
to leave that
channel and resume scanning.
7
