Uniden Ui15, Инструкция по эксплуатации

Страница: 32 / 40

Contact Tech Support at 1.800.215.7015 or email at support@unidencellular.com
32
By capturing the best input signal you will be able to enjoy the maximum coverage
and best quality signal inside where your server antennas are located. The better
the input signal, the better the output signal. In order to find the best input signal,
you want to place your outdoor (donor) antenna as high as possible with the least
amount of obstruction between the antenna and the cellular base tower. A clear line
of site is ideal.
Isolating the signal from the antennas is done by ensuring that the antennas are
not pointing to each other and by having enough distance or barrier shielding in
between them. The signals travel like rays of sunlight, a directional antenna will
send the signal in the direction that it is pointing. An omni directional antenna will
send the signal in every direction around it. So depending on your equipment its
important to be sure that your server antenna (indoor) is not sending the signal back
into the outdoor (donor) antenna.
THINGS TO CHECK WHEN EXPERIENCING WEAK
CELLULAR SIGNAL
Check all connections on the cable, antennas, and booster.
2
Check cable for bends and or cuts.
3
All LED lights on the booster should be green.
4
Ensure the donor antenna (outdoor) is pointing in the correct
direction and is capturing adequate signal for the booster.
1
Donor antenna (outdoor) and the Server antennas (indoor) have
adequate separation and are not causing feedback.
5