Operation
27
UNIDEN UH9060/UH9080
UHF CB Transceiver
Priority Watch
To switch Priority Watch On/Off;
1. Press
[MENU]
three times.
7KH3ULRULW\:DWFKVHWWLQJÀDVKHV
2. Press
/
to change the setting
between ON or OFF.
3. Press and hold
[MENU]
WRVDYH H[LW
from the menu mode.
NOTE
If SCAN is deactivated while it is tuned to an active channel, the
UH9060/UH9080 will stay on that active channel. If none of the channels
are active, the UH9060/UH9080 will reinstate the scan start channel.
NOTE
If OS/GS Scanning is initiated when there are no channels programmed
in OS/GS memory, an error tone will be heard and scanning will not start
(see Add/Remove Channels from SCAN Memory, p.23).
NOTE
If a button is not pressed within 10 seconds the UH9060/UH9080 will
automatically exit the Menu Mode.