Scanning
The UH9060/UH9080’s Scanning feature allows you to search for active channels
automatically.
There are 3 scanning modes;
Open Scan (OS),
Group Scan (GS) and
Master Scan (M.SCN) (a special case of Group Scan).
During SCAN the UH9060/UH9080 only checks channels or frequencies that are in
the SCAN Memory, which are indicated by the M (memory) icon. The UH9060/UH9080
maintains two SCAN Memories; one for Open Scan (OS) mode and the other for Group
Scan (GS)
PRGHWRJLYH\RXÀH[LELOLW\DQGDOORZ\RXWRXVHWKHUDGLRPRUHHIIHFWLYHO\
NOTE
Group Scan and Master Scan modes share the same SCAN Memory.
Furthermore, any combination of the three channel groups can be scanned by pressing
and holding
[POLICE]
during scan (except Master Scan) to select the desired channel
groups.
1. Press
[SCAN]
to start Scanning.
2. The SCAN icon appears.
3. The scan direction can be changed at any time by pressing
/
.
4. Press
[SCAN]
to stop Scanning.
Add/Remove Channels from SCAN Memory
Select OS/GS Scanning Mode. Select the channel you want to store.
Press and hold
[MEM]
. MEM icon appears and two beep tones sound.
To remove the channel from SCAN memory, press and hold
[MEM]
once more.
The MEM icon disappears.
Operation
23
UNIDEN UH9060/UH9080
UHF CB Transceiver
MASTER SCAN is the default scan mode and is enabled to allow continual communi-
cation across congested channels.
Master Scan scans channels stored into GS Memory and only opens the squelch for
signals with the correct subcode (CTCSS or DCS tone).
To achieve this, all radios in your group must have the same channels in GS memory
(group channels) and use the same Subcode (CTCSS or DCS tone).
By scanning only group channels, radios in the network will be able to detect and
MASTER SCAN Mode
