Fitting Instructions
UH9000S / UH9060S / UH9080S
Page 10 of 12
UHF CB Transceiver Cradle and Radio
1.
Using a suitable primer clean the instrument panel at the
cradle mounting location
2.
Fit the UHF CB transceiver cradle to the centre of the
instrument panel in the location shown using double sided
tap provided. Trim double sided tape to suit.
WARNING
If the indicated location is not suitable, do not install the
UHF CB transceiver cradle and radio in a location that may
interfere with the operation and deployment of the SRS
airbags or seatbelt pretensioners, including driver, front
passenger and knee SRS airbags if fitted. Doing so may
result in serious injury or death.
3.
Assemble the (2) slide mount brackets to the UHF CB
transceiver using the (2) screws supplied.
