18
UNIDEN UH825
Handheld UHF-CB Transceiver
Operation
Selecting OS or GS Scan Mode
1. Press
[MENU/MON] 5 times
to select
SCAN MODE.
2. Press
[
]
or
[
]
to select:
OS:
Scan all channels (By Default mode)
GS:
Scan saved channels (CH09-20 - By Default)
MS:
Scan channels in MASTER SCAN
P-/P1:
MASTER SCAN uses CH09-20
P2:
MASTER SCAN uses CH21-30, 39, 40
P3:
MASTER SCAN uses CH49-60
P4:
MASTER SCAN uses CH61-70, 79, 80
3. Save the setting by pressing and holding
[SCAN/MEM]
.
Add/Remove Channels from SCAN memory
1. Select the Scanning mode as explained above and exit the menu
by pressing PTT.
2. Press
[
]
or
[
]
to select the channel you want to store.
3. Press and hold
[MEM]
for 1.5 sec to store.
“
M”
icon appears near to that channel and a short tone beep is heard.
4. To remove the channels from Memory:
Press and hold
[MEM]
for 1.5 seconds once more.
A short tone beep is heard and the
“M”
icon disappears.
To Start Channel SCAN
1. Press
[SCAN]
and the radio will begin scanning the channels that are
in the OS or GS memory - depending on which of these is currently
active.
SCAN
icon flashes during scanning. Press
[PTT]
to return the
original set channel.
Scan Direction
SCAN will begin scanning for active channels in a sequential order.
You can change the scan direction (increasing or decreasing channel
number) by pressing
[
]
or
[
]
.
