manualshive.com logo in svg

Uniden UH8080S, Руководство пользователя

Поделиться
Скачать
Uniden UH8080S Скачать руководство пользователя страница 26

Operation

26

UNIDEN UH8080S

UHF CB Transceiver

Priority Watch

To switch Priority Watch On/Off;

1. Press

 [MENU]

 two times.

  The Priority Watch setting flashes.

2. Press 

 / 

 to change the setting

  between ON or OFF.

3. Press and hold 

[MENU]

 to save & exit

  from the menu mode.

NOTE

If SCAN is deactivated while it is tuned to an active channel, the 

UH8080S will stay on that active channel. If none of the channels are 

active, the UH8080S will reinstate the scan start channel.

NOTE

If OS/GS Scanning is initiated when there are no channels programmed 

in OS/GS memory, an error tone will be heard and scanning will not start 

(see Add/Remove Channels from SCAN Memory, p.22).

Selecting the Call Tone (Wake Up Tone)

1. Press 

[MENU]

 five times.

  The call tone setting flashes.

2. Press 

 / 

 to change the

  setting between 1, 2, 3... 10.

3. Press and hold 

[MENU]

 to save

  & exit from the menu mode.

NOTE

If a button is not pressed within 10 seconds the UHF CB Radio will 

automatically exit the Menu Mode.

Содержание UH8080S





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды