41
UNIDEN UH8080S
UHF CB Transceiver
Operation - Special Features
Group Calling
The UH8080S has the capability to respond to Group Calling and to transmit Group
Calling Codes.
Group Calling allows you to call members of your group simultaneously. However, to do
this, you need to follow a certain format (see below) when programming your TX Selcall
ID.
Selcall ID Format
To call
Transmitter SELCALL ID
10 radios
[X] [X] [X] [X] [A]
100 radios
[X] [X] [X] [A] [A]
1000 radios
[X] [X] [A] [A] [A]
10000 radios
[X] [A] [A] [A] [A]
where: [X] is a common Selcall ID prefix of your group
- and - [A] is the CCIR Assigned Group Tone Code
Example:
If one group comprises 10 members with Selcall IDs the ID numbers could be as follows:
Group ID # Individual ID#
[1] [2] [3] [4] [0]
[1] [2] [3] [4] [1]
[1] [2] [3] [4] [2]
[1] [2] [3] [4] [3]
to -
[1] [2] [3] [4] [9]
all in TSQ mode at CH20
If someone transmits ID 1234A on CH20, all of the above units will open their Tone
Squelched Receiver.
Group Calls and ordinary Selcalls can be differentiated in the following manner:
Group Call - Low tone beeps
Ordinary Selcall - High tone beeps
