24
UNIDEN UH8060S
Operation
Priority Watch
To switch Priority Watch On/Off;
1. Press
[MENU/ENTER]
four times.
The Priority Watch setting flashes.
2. Press
/
on the Remote SPK/MIC
to change the setting between ON or OFF.
3. Press
[MENU/ENTER]
to store the setting.
4. Press and hold
[MENU/ENTER]
to save & exit from the menu mode.
NOTE
If SCAN is deactivated while it is tuned to an active channel,
the UHF CB Radio will stay on that active channel.
If none of the channels are active, the UHF CB Radio will
reinstate the scan start channel.
NOTE
If OS/GS Scanning is initiated when there are no channels
programmed in OS/GS memory, an error tone will be
heard and scanning will not start (see Programming Scan
Channels - below).
Add/Remove Channels from SCAN Memory
Select which Scanning Mode you wish to use
- OS or GS. Select the channel you want to store.
Press
[MEM]
to store. MEM icon appears
and a short tone beep is heard.
To remove the channel from SCAN memory,
press
[MEM]
once more.
The MEM icon disappears.
UHF CB Transceiver
