![Uniden UH6000 Скачать руководство пользователя страница 13](http://html.mh-extra.com/html/uniden/uh6000/uh6000_owners-manual_841568013.webp)
13
Operation
Recalling the Instant Prority Channel
Momentarily press
[INST]
on the microphone at any time to return to the
Instant Channel. Press
[INST]
again to return to the previous channel.
Transmitting
The UHF CB Radio uses UHF-CB Channels.
NOTE
For your reference a list of the available channels,
corresponding frequencies and guidelines for their use and
selection is printed on page 23. For Australia, Channels 05
and 35 are reserved for Emergency Calls.
Select the desired channel.
Listen to the channel to make sure there is no activity.
Hold the microphone approx. 7cm from your mouth. Press the
microphone’s
[PTT]
button and speak normally across (not into) the
microphone.
Release the
[PTT]
button to end the transmission and listen for a reply.
Call Function
Press
[CALL]
on the microphone. A three second ringing tone will
be transmitted. You may select from 5 types of tones (see p.18 for
“Selecting the Call tone”).
NOTE
Current regulations require calling tones to be restricted to
one transmission per minute. If a second transmission is
attempted within one minute then an error tone will sound.
Using Repeater Channels
UHF CB Repeaters are used to retransmit or relay your signal. Repeaters
will extend the range of your radio and overcome the shielding effect caused
by solid obstructions. In normal Simplex operation, your radio transmits on
one particular frequency and receives on that same frequency.
UNIDEN UH6000
UHF CB Transceiver