11
Operation
Think of the squelch control as a
gate. If you increase the squelch level
to maximum it raises the ‘Squelch
gate’ so only the strongest signals get
through.
If you decrease the squelch level to
minimum it lowers the ‘Squelch Gate’
to the extent that weak signals can
get through.
If unwanted weak and noisy signals
are getting through increase the
squelch level (‘Squelch Gate’) to a
medium level. Now only medium
and strong signals get through.
UNIDEN UH6000
UHF CB Transceiver
oF (off) - squelch is fully open to noise & signals.
Equivalent to Monitor Mode
1 - max sensitivity (min squelch):
Weak (distant) signals can open the squelch.
5 - med sensitivity (med squelch):
Medium and strong signals can open the squelch.
9 - min sensitivity (max/tight squelch):
Strong/nearby signals can open the squelch.
It requires no adjustment.
NOTE
You must select a channel which is not in use before setting
the SQUELCH control. (see p.12 for “Selecting a Channel”).
