background image

with equipment or parts or as part of any system 
not manufactured by Uniden, or (F) installed or 
programmed by anyone other than as detailed by the 
owner’s manual for this product.
STATEMENT OF REMEDY: In the event that the 
product does not conform to this warranty at any 
time while this warranty is in effect, warrantor will 
either, at its option, repair or replace the defective 
unit & return it to you without charge for parts, 
service, or any other cost (except shipping & 
handling) incurred by warrantor or its representatives 
in connection with the performance of this warranty. 
Warrantor, at its option, may replace the unit with a 
new or refurbished unit.
THE LIMITED WARRANTY SET FORTH ABOVE IS THE 
SOLE & ENTIRE WARRANTY PERTAINING TO THE 
PRODUCT & IS IN LIEU OF & EXCLUDES ALL OTHER 
WARRANTIES OF ANY NATURE WHATSOEVER, 
WHETHER EXPRESS, IMPLIED OR ARISING BY 
OPERATION OF LAW, INCLUDING, BUT NOT LIMITED 
TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY 
OR FITNESS FOR A PARTICULAR PURPOSE. THIS 
WARRANTY DOES NOT COVER OR PROVIDE FOR THE 
REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR 
CONSEQUENTIAL DAMAGES. Some states do not 
allow this exclusion or limitation of incidental or 
consequential damages so the above limitation or 
exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specific 
legal rights, & you may also have other rights which 
vary from state to state. This warranty is void outside 
the United States of America & Canada. 
PROCEDURE FOR OBTAINING PERFORMANCE OF 
WARRANTY: If, after following the instructions in the 
owner’s manual you are certain that the Product is 
defective, pack the Product carefully (preferably in 

its original packaging). Disconnect the battery from 
the Product & separately secure the battery in its 
own separate packaging within the shipping carton. 
The Product should include all parts & accessories 
originally packaged with the Product. Include 
evidence of original purchase & a note describing the 
defect that has caused you to return it. The Product 
should be shipped freight prepaid, by traceable 
means, to warrantor at:
Uniden America Service 
4700 Amon Carter Blvd. 
Fort Worth, TX 76155

Содержание UDW20553































Отзывы: