fCC COMPlIANCE INfORMATION
PART 15 COMPlIANCE STATEMENT
This device complies with Part 15 of the FCC
Rules. Operation is subjected to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation. Privacy of
communications may not be ensured when using
this device.
This equipment has been tested and found to
comply with limits for a Class B digital device,
pursuant to Part 15 of the FCC rules and ETSI
(EN) 300328. These limits are designed to provide
reasonable protection against harmful interference
in residential installations. This equipment
generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
x
Reorient or relocate the receiving antenna.
x
Move the equipment away from the monitor.
x
Plug the equipment into an outlet on a circuit different
from that to which the monitor is connected.
x
Consult the dealer or an experienced radio/television
technician for additional suggestions.
#
CAUTION! Any changes or modifications to
this equipment not expressly approved by the
party responsible for compliance could void
your authority to operate the equipment.
