30
Special Features
direction upward. or appears according to the
current search direction.
Storing Frequencies Found During
Chain Search into Channel Memory
You can store frequencies you find in chain search
mode or chain search hold mode.
1. Press
Func
+
Pgm
in chain search mode or
chain search hold mode. The lowest blank
channel appears.
2. Press
E/Pgm
to store the frequency into the
blank channel. To select another channel, press
Func
+ or
Func
+ before you press
E/Pgm
.
If you try to save a frequency that is already stored,
the scanner sounds an error tone and displays the
channel that was duplicated. If you entered the
frequency by mistake, press /Clr. To enter the
frequency anyway, press
E
to accept.
The scanner sets itself to program mode after you
store a frequency.
Setting the Search Range
You can use this mode to define the search range
used during a search in each search bank. To
change a search range, press
Func
and
PSrc
.
SRCH
appears. Then select a search bank.
When you select the search bank, the lower limit
and upper limit frequency assigned in the search
bank alternate on the display.
To select another search bank, press
Func
+
PSrc
or
Func
+ to increase the search bank number
or
Func
+
to decrease it. Hold down
Func
+ or
UB334 Paper OM reduced size.fm Page 30 Friday, September 9, 2005 11:16 AM
