Uniden UBC370CLT, Руководство пользователя

Страница: 10 / 28

Number Key/Knob What it does
4
Alarm slide
switch
Set to
Off
to disable alarm; Set to
Radio
to enable the
radio alarm; Set to
Tone
to enable the tone alarm
5 SNOOZE/
Light
Snooze: Press while the alarm sounds to silence the alarm
for 5 minutes.
Light: Tap to turn on the backlight for 15 seconds. Press
and hold to turn the LCD backlight on permanently. Press
and hold again to turn off the backlight.
6
Time slide
switch
Use to select your desired operation:
Alarm Set
;
Clock Set
;
Clock
.
7 HOLD/Sleep HOLD: press to temporarily stop scanning, limit searching,
or service searching and remain on the channel. The
scanner displays the channel on hold. Press again to
resume searching or scanning.
Sleep: Press and hold to set how long the unit will remain
on before it turns itself off.
8
E/PGM
Program mode: Press to enter the Program mode. Then:
Enter the desired frequency using the numeric keys.
Press
E/PGM
to store that frequency into the memory.
In Scan Program mode, Press
E/PGM
after entering the
name and CTCSS/DCS into channel memory.
In Limit Search mode, Press
E/PGM
after entering the
frequency to program the upper and lower frequency limits.
9
0 to 9 -
Press a numeric key to enter a frequency.
- Press a numeric key to change a channel (Direct
Channel Access feature)
- Press a numeric key to enable or disable a channel
banks. These channel banks display across the top of
the LCD.
-
Press 4 key to move cursor to left in channel name input
mode.
-
Press 6 key to move cursor to right in channel name
input mode.
10
Power
Press to turn power on and off. The time displays when
power is off (Standby mode).
11
./Clr -
Press to input a decimal point when you enter a
frequency.
-
Press to cancel a numeric key input
( 0
to
9)
-
Press to clear an error display.
-
Press to cancel the character code input of the channel
name and CTCSS/DCS by arrow key.
10