background image

Contact Tech Support at 1.800.215.7015 or email at [email protected]

Notre but est de vous donner une solution prouvée qui finira votre frustration contre 
des signaux cellulaire faible et chuté. Celas vous laissez prendre plaisir d’une qualité 
d’appelle excellent, plus de convenance, et une productivité plus haute.

3

A PROPOS DE VOTRE AMPLIFICATEUR CELLULAIRE

INSTRUCTIONS POUR INSTALLATION DES 

AMPLIFICATEURS SUIVANTS:

•    

            

DB-CP

•                    

DB-CP

•    

 

DB-CP

•                       

DB-CP

•    

 

DB-CP

•    

 

  

DB-CP

•    

 

DB-CP

•    

 

               

•    

 

          

TB-CPA

•    

 

        

TB-CPA

NOTE: 

This manual contains important safety and operating 

information. Please read and follow the instructions in this manual, 
failure to do so could be hazardous and result in damage to your 
cellular booster.

Important Note Related to Industry Canada

 

Radio equipment that is installed, activated, modified, repaired, maintained 
or allowed to be operated is duly authorized and operated in accordance 
with the aforementioned authorization, by checking the operator’s license, 
or, failing that, consulting the following website at: http://spectrumdirect.
ic.gc.ca

Содержание U2 DB-CP













































Отзывы: