Register the Handset
You need to register the TXC580 before use.
To register the additional handset, place the TXC580 handset on the
original unit’s base for at least 5 seconds. The
status
LED on the
original base will flash indicating that registration is occurring.
After 5 seconds, the TXC580 handset will be registered.
• In some cases you may need to attempt registration
a few times.
• You cannot register the handset when the original phone
is in use.
– 5 –
Using the TXC580 with the
Integrated Answering Device
If the original unit has a built-in answering system, you can check
your new messages, skip, repeat, or delete your messages with the
TXC580 handset. For more instructions, see the owner’s manual
supplied with the original unit.
• If you press
end
before the answering system answers, the
phone will return to the standby mode.
• When the answering system does not answer within 7
seconds, you will hear a beep and the phone will return to
the standby mode.
• When you receive a call, the remote operation is canceled.
To playback a message
Press
-
.
To skip a message
Press
3
.
To repeat the current message
Press
1
after four seconds.
To repeat the previous message
Press
1
within four seconds.
To delete a message
Press
4
.
To stop operation
Press
end
.
UU812BH (TXC580) ENG 7/19/02 10:23 AM Page 5
Содержание TXC580
Страница 1: ......