Connect the Charger
1
Connect the AC adapter
to the
DC IN 9V
jack and
to a standard 120V AC
wall outlet.
2
Set the charger on a desk
or tabletop, and place
the handset in the
charger with the keypad
facing forward.
3
Make sure that the
charge
LED illuminates. If the LED does not illuminate, check to
see that the AC adapter is plugged in and that the handset
makes good contact with the base charging contacts.
– 4 –
•
Use only the supplied AD-446
AC adapter. Do not use any
other AC adapter.
• Place the charger close to the AC
outlet so that you can unplug the
AC adapter easily.
• ”
HS2
” appears on the display
while the handset is charging.
Polarity of the plug
Low battery alert
When the battery pack is very low and needs to be charged, the
phone is programmed to eliminate functions in order to save power.
If the phone is in the standby mode, ”
Low Battery
” appears
on the LCD and none of the keys will operate. If the phone is in
use, ”
Low Battery
” appears and the handset beeps. Complete
your conversation as quickly as possible and return the handset to
the base unit for charging.
Cleaning the battery charging contacts
To maintain a good charge, it is
important to clean the battery
contacts on the handset and base
unit with a dry cloth or a pencil
eraser about once a month.
Do not use any liquids or solvents.
contacts
UU812BH (TXC580) ENG 7/19/02 10:23 AM Page 4
Содержание TXC580
Страница 1: ......