25
Setting.up.the.Phonebook.
Your.phone.allows.you.to.store.up.to.2.numbers.per.name.and.up.to.00.names.in.your.handset.and.base.phone-
book..Your.phone.shares.memory.between.your.phonebook.and.CID.with.a.total.of.00.entries.which.are.not.used.
up.by.the.2.phone.numbers.that.can.be.stored.per..name.entry..Once.you.store.00.phonebook.entries,.CID.infor-
mation.will.not.be.stored.and.will.only.display.at.time.of.new.incoming.calls..When.Phonebook.entries.are.full,.you.
will.hear.a.beep.and.MEMORY.FULL.appears..You.cannot.store.any.additional.names.and.numbers.unless.you.de-
lete.some.of.the.existing.ones.
You.can.also.use.the.phonebook.or.speed.dial.locations.to.store.a.group.of.numbers.(up.to.32.digits).that.you.may.
need.to.enter.once.your.call.connects..This.is.referred.to.as.Chain.Dialing.
Creating.Phonebook.Entries
To.store.names.and.numbers.in.your.Phonebook,.please.follow.these.steps:
When.the.phone.is.in.standby.mode,.press.
[ ]
.(on.the.left.side.of.the.four-way.key).
To.create.a.new.phonebook.entry,.press.the.
NEW
.soft.key..Edit.Name.appears.
Enter.the.name.for.this.entry.(Edit.Name).
.
Use.the.keypad.to.enter.a.name.for.this.entry;.the.name.can.contain.up.to.6.
characters..(See.page.3.for.instructions.on.entering.text.).If.you.do.not.want.to.
enter.a.name.for.this.entry,.your.phone.will.store.this.entry.as.No.Name..Press.the.
OK
soft key when you are finished.
)
2)
3)
< P h o n e b o o k >
T o t a l : 0
S e a r c h [ A ‑ Z / / ]
BACK
OPTIONS
NEW
< P h o n e b o o k >
T o t a l : 0
S e a r c h [ A ‑ Z / / ]
BACK
OPTIONS
NEW
E d i t N a m e
。
BACK
OK
E d i t N a m e
。
BACK
OK