Uniden TRU9380 Series, Руководство пользователя

Страница: 36 / 67

35
Seven-Digit Dialing
If you can make a local call by dialing only 7 digits (instead of 10), you can program your local area code in your
phone. Calls that come from within your area code will show only the 7-digit phone number; calls from outside your
area code will show all 10 digits. To enter an area code, follow the steps below:
Press [menu/clear] . Select the GLOBAL SETUP menu, and then the AREA CODE submenu.
Use the number keypad ( [0] through [9] ) to enter a 3-digit area code. If an area code has already been stored, it
appears in the display. Press [menu/clear] to delete the stored code, and then enter a new one.
Press [select/ ]
<RXZLOOKHDUDFRQ¿UPDWLRQWRQH
Using the Intercom
You can use the intercom to talk to another station without using the phone line.
Making an Intercom Page
From the
handset
With the phone in standby, press [hold/int’com/xfer] .
Use [ ] or [ ] to select the station you want to talk with, then press [select/ ] . Select ALL to
page all other stations.
To cancel the intercom page, press
[ ] .
1.
2.
3.
Note: Intercom paging will be canceled if any of the following things occur:
— You receive an outside call or an intercom page while selecting the other handset.
— You do not select a handset within 30 seconds.
— The party does not answer the page within one minute.
— The party is busy.
— The party is out of range (UNAVAILABLE appears in the display).
1.
2.
3.