52
Programming Radio Systems
Setting Lockout On A Car
Program SysteM
E
Select the system
E
Edit Car
E
Select the car
E
Set Lockout
E
This setting determines whether the scanner will scan this
car when it is enabled. Select your setting, then press
E
.
Lockout
- the car is not scanned.
Unlocked
- the car is scanned.
Note: The default setting is Unlocked.
Programming Conventional Systems
Program SysteM
E
New System
E
Conventional
E
Confirm?
E
The scanner creates an empty conventional system, with
a default name of
System nnn C
.
nnn
increments
as you add new systems.
C
indicates that this is a
conventional system.
Refer to the appropriate section to set system-wide options:
• See “Editing the System Name” on Page 55
• See “Editing the System Quick Key (Conventional
Systems Only)” on Page 55
• See “Setting System Lockout” on Page 56
• See “Setting the System Hold Time” on Page 56
• See “Setting the Channel Delay Time” on Page 57
• See “Setting Data Skip” on Page 57
• See “Deleting Systems” on Page 58
• See “Copying Systems” on Page 58
• See “Entering/Editing Conventional Channel Groups”
on Page 53
Menu
Menu
SC230 Paper OM.fm Page 52 Wednesday, October 6, 2004 10:51 AM