5
InstallIng your phone
Connect the Corded Handset
Test the Connection
Pick up the corded handset from the base. You should hear a dial tone.
When you get a dial tone, make a quick test call.
Use the coiled cord to connect the corded handset to the connector on the
bottom of the base.
Connect the Power and Telephone Cords
1. Connect the base AC adaptor to the power jack and the telephone cord
to the LINE jack on the bottom of the base.
2. Plug the AC adaptor into a standard 240V AC power outlet, and connect
the telephone cord to a standard telephone wall jack.
Getting Started
Optional Backup Battery Installation
Batteries may be used instead of the supplied AC Adaptor.
1. Remove the battery compartment cover.
2. Fit 3 x 1.5V AA alkaline batteries.
3. Replace the cover.
Based on ½ hour use per day, good alkaline batteries should last 2-3
months.
#
If using the AC Adaptor, batteries are not required for normal
operation.
#
Always ensure telephone cord and AC adaptor is disconnected before
opening the battery compartment door and installing batteries.
#
Caution: there is a risk of explosion if the battery is replaced by
an incorrect type. Dispose the used batteries according to the
instructions.
