25
ADVANCED SETTING
PIR Sensor Setting
The built-in PIR motion sensor will detect changes in temperature/radiation.
When the PIR motion sensor detects motion, it will trigger an alarm and
prompt the camera to take the following action: sound siren/alarm , send Push
Notification to your mobile devices, send E-mail alert and Record movement to
your SD card.
Setup PIR Motion Schedule
By default, the PIR motion sensor is enabled. If you want to schedule it to arm
or disarm, follow the steps below:
1. Go to “ Device Settings ” > “ Alarm ” > “ PIR Settings ”. Tap on
“Schedule”.
2. Tap on the Square (hour) to disable PIR detection (Grey) or tap again to
enable PIR detection (Blue). Tap to return to the previous page and then
tap on the top right to save the settings.
Note
: To repeat same PIR schedule in a week, tap “ Copy To ” to continue.
