Uniden GSHC1000 Series, Руководство пользователя

Страница: 17 / 44

17
The App Cam 26 is included only in the GSHC5000
(Deluxe Kit) and does NOT come paired to the Gateway.
1. First connect the camera to the Wi-Fi router via the
Ethernet cable supplied.
2. Connect the antenna to the camera. You can
attach the camera stand to the camera as
well, but it is not necessary.
3. Connect the camera to power. After about
45 seconds, the camera goes through a pan/
tilt cycle and the green LED begins to flash
(3-flash/pause pattern).
4. Launch the GuardianHome App, select the
Gateway, tap in the ‘Status’ section and
tap to add new camera to the Gateway.
Tap . The App will now search for the
camera connected to the Wifi Router and
pull in the camera DID.
5. Tap if search didn’t produce any result
and you would like to manually enter DID (15
characters). (DID can be found on the back of camera).
6. Please name your camera and specify the location where the camera will
be installed. The camera’s default security code is ‘123456’. Tap to
complete pairing the camera to the Gateway.
App Cam 26
Connecting to the Gateway
Follow the steps below to pair the App Cam 26 to
the Gateway.