Uniden GNVR 49xxW, Руководство пользователя

Страница: 92 / 160

92
prompt, alarm upload, email and etc will not be activated. For example, if you
set the anti-dither time as 10 second, you can see the each activation may
last 10s if the local alarm is activated. During the process, if system detects
another local alarm signal at the fifth second, the buzzer, tour, PTZ activation,
snapshot, record channel will begin another 10s while the screen prompt,
alarm upload, email will not be activated again. After 10s, if system detects
another alarm signal, it can generate an alarm since the anti-dither time is out.
Show message : System can pop up a message to alarm you in the local host
screen if you enabled this function.
Alarm upload : System can upload the alarm signal to the network (including
alarm centre) if you enabled current function.
Send email : System can send out email to alert you when alarm occurs.
Record channel : you can select proper channel to record alarm video
(Multiple choices). At the same time you need to set alarm record in schedule
interface (Main Menu->Setting->Schedule) and select schedule record in
manual record interface (Main Menu->Advance->Manual Record).
Latch : Here is for you to set proper delay duration. Value ranges from 10 to
300 seconds. System automatically delays specified seconds in turning off
alarm and activated output after external alarm cancelled.
Tour : Here you can enable tour function when alarm occurs. System supports
1/8-window tour. Please note the tour setup here has higher priority than the
tour setup you set in the Display interface. Once there two tours are both
enabled, system can enable the alarm tour as you set here when an alarm
occurred. If there is no alarm, system implements the tour setup in the Display
interface.
Snapshot : System can snapshoot corresponding channel when an alarm
occurs. Please note the activation snapshot has the higher priority than
schedule snapshot. If you have enabled these two types at the same time,
system can activate the activation snapshot when alarm occurs, and otherwise
system just operates the schedule snapshot.
Log : Check the box here, system can record local alarm log.
Buzzer : Highlight the icon to enable this function. The buzzer beeps when
alarm occurs.