Uniden GNVR 49xxW, Руководство пользователя

Страница: 86 / 160

86
Enable : Please tick enable to enable motion detection function for channel 1.
If you wish to do for other channels, please select channel number or all from
the dropdown list and tick enable again. Remember to click save to save the
setting.
Region : Click select button, the interface is shown as following.
Here you can set motion detection zone. There are four zones for you to
set. Please select a zone first and then left drag the mouse to select a zone.
The corresponding color zone displays different detection zone. After you
completed the setup, please click ENTER button to exit current setup. Do
remember click save button to save current setup. If you click mouse right
button to exit the region setup interface system will not save your zone setup.
Sensitivity : System supports 6 levels. The sixth level has the highest
sensitivity.
Anti-dither : Here you can set anti-dither time. The value ranges from 5 to
600s. The anti-dither time refers to the alarm signal lasts time. It can be seem
as the alarm signal activation stays such as the buzzer, tour, PTZ activation,
snapshot, channel record. The stay time here does not include the latch time.
During the alarm process, the alarm signal can begin an anti-dither time if
system detects the local alarm again. The screen prompt, alarm upload, email
and etc will not be activated. For example, if you set the anti-dither time as
10 second, you can see the each activation may last 10s if the local alarm is
activated. During the process, if system detects another local alarm signal at