Uniden G14xx Series, Руководство по аксессуарам

Страница: 5 / 12

5
Power Up the Camera
Connect one end of a DC 9V AC adaptor to the camera’s power
pigtail and plug the other end into a 240 volt AC (standard
indoor) power outlet.
Adjust the camera viewing position, if needed.
If... Try...
there is no camera
picture
Verify that the power supply adaptor for
the camera(s) is plugged in.
the picture quality
is poor
Clean the camera lens.
a white image ap-
pears at night
The camera’s infra-red LED shines due to
the invisible light that reflects off surfaces
such as glass, causing white light. Place
the camera on the other side of windows
with the lens side flush against the sur-
face to improve the night vision, or place
the camera in a well-lit area.
Night Vision
This camera has built-in IR LEDs, which provides the camera
with the ability to view images in no/low light conditions. It is
important to use the provided power adaptor (and not the bat-
teries) when using the camera for prolonged periods in low light
conditions.