Uniden G14xx Series, Руководство по аксессуарам

Страница: 3 / 12

3
Installing the Camera
You can mount the camera with the stand on the bottom (for a flat
surface such as a tabletop), on the side (for a wall), or on the top (for the
ceiling).
The following tools are required:
•
Electric Drill
•
5mm Drill Bit
•
No. 2 Phillips Screwdriver
Mount the Camera Base
1. Hold the base of the camera stand where you want to mount
it and mark the location of the screw holes.
2. Drill holes using the 5mm drill bit.
3. Insert anchors.
4. Use the included screws to attach the base to the wall or
ceiling. You can also screw the base into a flat surface such as
a tabletop if needed.
Before attaching the camera, tug gently on the stand to make
sure it is securely in place.
When you are positioning the camera, you might want to bring the
monitor along; it’s much easier to get the camera into the right position
when you have the monitor handy.