Uniden FP1200, Руководство пользователя

Страница: 7 / 24

7
On the base front, slide the handset hook out of the slot. Rotate hook
180 degrees and flip it from front to back. Slide it back into the slot. It
should extend slightly; this extension fits into a slot on the handset.
MOUNTING THE PHONE DIRECTLY ON THE WALL
Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the
mounting location that could cause a hazard when inserting
screws into the wall.
• Mount your phone within distance of a working phone jack.
• Make sure the wall material is capable of supporting the weight
of the base and handset.
• Use screws with anchoring devices suitable for the wall material
where the base unit will be placed.
• Be sure the wall is capable of supporting the weight of the
phone, and use the proper type of anchoring device for the wall
material.
• Insert two #10 screws (minimum length of 35mm, not supplied)
into the wall, 78mm horizontally apart.
• Leave the screw heads 3mm away from the wall to allow room
for mounting the phone.
• Align the mounting slots over the screws and slide the base
down into place.
FP1200_101011.indd 7 11/10/11 4:48 PM