Uniden FP1200 Скачать руководство пользователя страница 3

3

SAFETY INSTRUCTIONS  

To reduce the risk of fire, electrical shock, and injury, please follow 

these basic safety precautions before you use this equipment.
1.  Carefully read the instructions in this manual.

2.  Follow all warnings and instructions marked on the unit.

3.  When cleaning, unplug the telephone jack from the wall outlet. Use 

a damp cloth. 

DO NOT

 use liquid or aerosol cleaners.

4.  Do not use this equipment near water eg, near a kitchen sink, 

bath-Tub, washbowl, laundry rub, swimming pool or in a wet 

basement.

5.  Install in a protected location. Ensure all lines and cords are away 

from foot traffic. 

DO NOT

 place objects on the line cord that may 

cause damage or abrasion.

6.  Avoid spilling any liquid on the unit. This may cause internal 

shorting, fire or shock and is not covered under your warranty.

7.  Do not overload wall outlets and extension cords as this can result 

in the risk of fire or electrical shock.

8.  Never push objects of any kind into this telephone as they can 

touch dangerous voltage points or short out parts that could result 

in a risk of fire or electrical shock.

9.  Take the phone to a qualified technician when it requires repair 

work or service. To reduce the risk of electrical shock, do not 

disassemble the telephone. Opening or removing covers can 

expose you to dangerous voltages or other risks. Incorrect re-

assembly can cause electrical shock during subsequent use.

10.  Avoid using the telephone during an electrical storm. There can be 

a slight risk of electrical shock from lightning.

11. 

DO NOT

 use the telephone to report a gas leak, if in the vicinity of 

the leak.

12.  Unplug this telephone from the wall outlet and refer servicing to 

qualified service personnel under the following conditions:

•  If liquid is spilled into the unit.

•  If the unit is exposed to rain or water.

•  If the unit does not operate normally by following the operating 

Instructions.

•  If the unit is dropped or the casing is damaged.

•  If the unit exhibits a distinct change in performance.

FP1200_101011.indd   3

11/10/11   4:48 PM

Содержание FP1200

























Отзывы: