Uniden EZI 996 Series, Руководство пользователя

Страница: 9 / 52

G E T T I N G S T A R T E D
9
GETTING ST
AR
TED
w w w . u n i d e n . c o m
5) Once the handset battery pack is fully
charged, connect the telephone line cord to
the
tel line jack and to a telephone outlet. If
your telephone outlet isn't modular, contact
your telephone company for assistance.
6) After the phone is connected, pick up the handset from the base and press talk .
If you do not get a dial tone, check the following:
• Be sure the telephone cord is securely connected to both the base and an active
telephone jack.
• Be sure the charge LED is on. If not, check the AC adapter.
• Be sure the handset is fully charged.
• Be sure the battery is installed correctly.
• Check the dialing mode your telephone company uses. If your telephone company
uses pulse dialing, set your phone to pulse dialing. (see page 10.)
Modular
To telephone outlet
To tel line
Telephone line cord
(supplied)