Uniden EZI 996 Series, Руководство пользователя

Страница: 10 / 52

G E T T I N G S T A R T E D
10
w w w . u n i d e n . c o m
C. Choose the Dialing Mode
Most phone systems use tone dialing which sends DTMF tones through the phone
lines. However, some phone systems (such as those in rural areas) still use pulse
dialing. The default setting is tone dialing. Depending on your dialing system, set the
mode as follows:
Place the switch in the tone position for tone
dialing, or the pulse position for pulse dialing.
If you are not sure of your dialing system, set for
tone dialing. Make a trial call. If the call
connects, leave the setting as is. Otherwise set
for pulse dialing.
D. Set the Visual Ringer Brightness
The visual ringer switch allows you to set the
brightness of the visual ringer LED on the base.
There are three options to choose from: high,
low and off. If you set the switch to off,
visual
ringer LED never flashes.
• Make sure your
battery pack is fully
charged before
choosing the
dialing mode.
• If your phone system
requires pulse dialing
and you need to send
the DTMF tones for
certain situations
during a call, you may
switch over to tone
dialing. (Refer to
"Tone Dialing Switch-
over" on page 19.)