Making a Call from the Handset
1. Remove the Handset from the Base Unit.
2. Press either TALK, LINE 1, or LINE 2.
Note:
When TALK is pressed, the EXP 9200 returns to the last line used.
The TALK LED flashes and there is a slight delay while the Spread
Spectrum Technology in your EXP 9200
sets up a digital link between the
Handset and the Base Unit.
3. When the LINE 1 or LINE 2 LED glows steadily and you hear a dial tone, dial
the number you are calling by pressing the numbers on the keypad or use
one of the memory features. (See “Using Your EXP 9200 Memory.”)
4. When you finish the call, place the Handset back on the Base Unit.
AutoStandby automatically hangs up the phone.
—OR—
When the Handset is away from the Base Unit, press TALK to hang up the phone.
Two-Line Operation
The Handset and the Base Unit can be used on separate telephone lines at the
same time. For example, if the Handset is on a call with Line 1, you can make
or receive a call with the Base Unit on Line 2.
Dialing a Stored Number from the Base Unit
1. Use the keypad on the Base Unit.
2. Press LINE 1, LINE 2, or SP. PHONE.
3. Press MEMO and the memory number (01-20) for that number.
—OR—
Press the ONE-TOUCH DIALING button for that number. Your EXP 9200 then
dials the previously stored number.
(To store a number, refer to “Using Your EXP 9200 Memory.”)
Note:
If you select a memory location that does not have a stored
number, the Base Unit will beep rapidly and the phone will not dial.
17
