manualshive.com logo in svg

Uniden EXP 9200, Руководство пользователя

Поделиться
Скачать
Uniden EXP 9200 Скачать руководство пользователя страница 12

Attaching the Belt Clip

1. Insert the tab at the top of

the Belt Clip into the notch
on the back of the Handset.

2. Snap the tabs on the bottom

portion of the Belt Clip into
the two notches (labeled
“CLIP”) on the sides of the
Handset.

Use the Belt Clip to attach the Handset to your belt or pocket for convenient
portability.  To remove, pry one tab of the lower part of the Belt Clip from the
notch labeled “CLIP,” then push the entire clip upward.

Installing the Battery Pack

1. Remove the battery compartment cover on the

Handset by sliding it down.

2. Slide in the Nickel-Cadmium Battery Pack

(BP-9100).

Note:

The Battery Pack is keyed to fit so
the electrical contacts touch the 
Handset’s electrical contacts.

3. Slide the battery compartment cover back on.

After removing the Battery Pack, the built-in Memory
Backup feature allows up to 3 minutes to install a
charged Battery Pack. This feature prevents losing
any phone numbers that may be stored in the
telephone’s memory.

Charging the Handset’s Battery Pack

The rechargeable Nickel-Cadmium Battery Pack
must be fully charged before using your EXP 9200
for the first time. 

Note:

Allow the unit to charge without interruption for 12 to 16 hours.

1. Place the Handset on the Base Unit.

2. Make sure the CHARGE LED lights.

If the CHARGE LED does not light, check to see that the AC Adapter is
plugged in, and that the Battery Pack is properly installed.

RI

NG 

ON

BA

T

T

SA

VE

CL

IP

12

Содержание EXP 9200
































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды