Uniden EXI3226 - EXI 3226 Cordless Phone Скачать руководство пользователя страница 48

Страница: 48 / 56

www.uniden.com

[ 48 ]

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first.

Symptom

The

charge/in use

LED won’t

light when the handset is
placed on the base unit.

Suggestion

•

Make sure the AC adapter is plugged into the base unit and wall outlet.

•

Make sure the handset is properly seated on the base unit.

•

Make sure the charging contacts on the handset and base unit are clean.

•

Press

channel

during a call to help eliminate background noise.

•

Make sure that the base unit antenna is in a vertical position.

•

Move the handset and/or base unit to a different location away from metal
objects or appliances and try again.

•

Make sure that you are not too far from the base.

•

Check both ends of the base unit telephone line cord.

•

Make sure the AC adapter is plugged into the base unit and wall outlet.

•

Disconnect the AC adapter for a few minutes, then reconnect it.

•

Change the digital security code (See page 45).

•

Make sure

line 1

line 2

is pressed.

•

The battery pack may be weak. Charge the handset on the base unit for
more than 15 hours.

•

The handset may be too far away from the base unit.

•

Place the base unit away from appliances or metal objects.

•

Change the digital security code (See page 45).

•

Keep the handset away from microwave ovens, computers, remote control
toys, wireless microphones, alarm systems, intercoms, room monitors,
fluorescent lights, and electrical appliances.

•

Move to another location or turn off the source of interference.

•

The handset was picked up before the second ring.

•

The call was placed through a switchboard.

•

Call your local telephone company to verify your Caller ID service is current.

•

Make sure that the CIDCW option is set to “

”.

The audio sounds weak
and/or scratchy.

Can’t make or receive calls.

The handset doesn’t ring
or receive a page.

The Caller ID/CIDCW does
not display.

Severe noise interference.

A D D I T I O N A L I N F O R M A T I O N

Содержание EXI3226 - EXI 3226 Cordless Phone

























































Результаты поиска

Содержание EXI3226 - EXI 3226 Cordless Phone

Отзывы:

Похожие инструкции для EXI3226 - EXI 3226 Cordless Phone

Бренды по названию

Популярные бренды

Uniden EXI3226 - EXI 3226 Cordless Phone, Руководство пользователя

Результаты поиска

Содержание EXI3226 - EXI 3226 Cordless Phone

Отзывы:

Похожие инструкции для EXI3226 - EXI 3226 Cordless Phone

Бренды по названию

Популярные бренды