www.uniden.com
[ 41 ]
C A L L E R I D F E A T U R E S
CALLER ID FEA
TURES
Calling a Caller ID name/number
You can place a call from the Caller ID list. The EXI3226 stores up to
80 messages.
1) Press
cid/menu/hold
. The Caller ID
summary screen shows the number
of new callers and total number
of calls.
2) Use
*
/tone/
or
#/
to select “
Line 1
” or “
Line 2
” Caller ID.
3) Press
/conf
to scan forward.
Press
/int’c
to scan backwards through the list.
4) Select the name/number that you
would like to dial.
5) Press
line 1
or
line 2
. The number
automatically dials.
Long Distance calls and Area Cord Setting/Cancellation
Pressing
1
while the incoming Caller ID information is displayed (in step 3)
will place the prefix “
1
” in the display to setup for a long distance call.
Pressing
3
will set or cancel an area code setting.
Using the Caller ID List
12/21 12:30PM 03
Jane Smith
214-555-1234
Line 1 Line 2
NEW 01 02
TTL 02 04
note
•
In Caller ID
operation, if no key is
pressed for more than
30 seconds, an error
tone sounds and the
telephone returns to
the standby mode.
•
If a call comes in via
a telephone system
that does not offer
Caller ID service, no
information is stored.
•
Each message can be
up to 15 characters
for the phone number
and the name.
•
The number of calls
from the same Caller
ID appears next to
the received time.
Once you view the
new calls, the number
will disappear.
