background image

A D D I T I O N A L   I N F O R M A T I O N   [ 3 9 ]

w w w . u n i d e n . c o m

Precautions!

Before you read anything else, please observe the following:

Warning!

Uniden America Corporation DOES NOT represent this unit to be 
waterproof. To reduce the risk of fire, electrical shock, or damage to the 
unit, DO NOT expose this unit to rain or moisture. 

Rechargeable Nickel-Metal-Hydride Battery Warning

•This equipment contains a rechargeable nickel-cadmium battery.
•Cadmium is a chemical known to the State of California to cause cancer.
•The rechargeable nickel-cadmium battery contained in this equipment 

may explode if disposed of in a fire.

Do not

 short-circuit the battery.

•Do not charge the rechargeable nickel-cadmium battery used in this 

equipment in any charger other than the one designed to charge this 
battery as specified in the owner’s manual. 
Using another charger may damage the battery or cause the battery to 
explode.

Rechargeable Nickel-Cadmium 
Batteries Must Be Recycled or 
Disposed of Properly

•Uniden voluntarily participates in an RBRC® industry program to collect 

and recycle nickel-cadmium batteries at the end of their useful life, 
when taken out of service within the United States. 
The RBRC® program provides a convenient alternative to placing used 
nickel-cadmium batteries into the trash or municipal waste stream, 
which is illegal in some areas.

•Through the RBRC® program, Uniden makes it easy for you to drop off 

the used battery at local retailers of replacement nickel-cadmium 
batteries. You may also contact your local recycling center for 
information on where to return the used battery. Please call 1-800-8-
BATTERY for information on Ni-Cd battery recycling in your area. 
Uniden's involvement in this program is part of its commitment to 
protecting our environment and conserving natural resources.

•RBRC® is a registered trademark of the Rechargeable Battery Recycling 

Corporation.

The exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in 
the literature accompanying the appliance.

Uniden works to reduce lead content in our PVC coated cords in our 
product and accessories.

WARNING: 

The cords on this products and/or accessories contain lead, a 

chemical known to the State of California to cause birth defects or other 
reproductive harm. 

Wash hands after handling

.

Important Safety Instructions

When using your telephone equipment, these basic safety precautions 
should always be followed to reduce the risk of fire, electrical shock, and 
injury to persons:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Use a dry 

cloth for cleaning without liquid or aerosol cleaners.

4. Do not use this product near water; for example, near a bathtub, wash 

bowl, kitchen sink or laundry tub, in a wet basement, or near a 
swimming pool.

5. Do not place this product on an unstable cart, stand, or table. 

The telephone may fall, causing serious damage to the unit.

6. Slots and openings in the cabinet and the back or bottom are 

provided for ventilation. To protect the product from overheating, 
these openings must not be blocked or covered. This product should 
never be placed near or over a radiator or heat register. This product 
should not be placed in a built-in installation unless proper 
ventilation is provided.

7. This product should be operated only from the type of power source 

indicated on the marking label. If you are not sure of the type of power 
supply to your home, consult your dealer or local power company.

8. Do not allow anything to rest on the power cord. Do not locate this 

product where the cord will be damaged by persons walking on it.

9. Do not overload wall outlets and extension cords, as this can result in 

the risk of fire or electrical shock.

10. Never push objects of any kind into this product through cabinet 

slots, as they may touch dangerous voltage points or short out parts 
that could result in a risk of fire or electric shock. Never spill liquid of 
any kind on the product.

11. To reduce the risk of electric shock, do not disassemble this product. 

Take it to qualified service personnel when service or repair work is 
required. Opening or removing covers may expose you to dangerous 
voltages or other risks. Incorrect reassembly can cause electric shock 
when the appliance is subsequently used.

12. Unplug this product from the wall outlet and refer servicing to 

qualified service personnel under the following conditions:

A. When the power supply cord is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when following the 

operating instructions. (Adjust only those controls that are 
covered by the operating instructions. Improper adjustment of 
other controls may result in damage and will often require 
extensive repair work by a qualified technician.)

E. If the product has been dropped or the cabinet has been damaged.
F. If the product exhibits a distinct change in performance.

13. Do not use the telephone to report a gas leak in the vicinity of the 

leak.

Additional Battery Safety Precautions

Caution!

To reduce the risk of fire or injury to persons by the battery, 
read and follow these instructions:

1. Use only the Uniden battery pack specified in the owner’s manual. 
2. Do not dispose of the battery pack in a fire. The cell may explode. 

Check the nickel-cadmium battery disposal package insert for disposal 
instructions.

3. Do not open or mutilate the battery pack. Released electrolyte is 

corrosive and may cause damage to the eyes or skin. It may be toxic 
if swallowed.

4. Exercise care in handling the battery in order not to short the battery 

with conducting materials such as rings, bracelets, and keys. The 
battery or conductor may overheat and cause burns.

5. Charge the battery pack provided with or identified for use with this 

product only in accordance with the instructions and limitations 
specified in the owner’s manual provided for this product.

6. Observe proper polarity orientation between the battery pack and 

battery charger.

SAVE THESE INSTRUCTIONS!

Important Electrical Considerations

Unplug all electrical appliances when you know an electrical storm is 
approaching. Lightning can pass through your household wiring and 
damage any device connected to it. This phone is no exception.

The FCC Wants You To Know

Changes or modifications to this product not expressly approved by 
Uniden, or operation of this product in any way other than as detailed by 
the owner’s manual, could void your authority to operate this product. 
Your telephone compiles with Part 68 of FCC Rules. You must, upon 
request, provide the FCC registration number and the REN to your 
telephone company. Both numbers are on the base unit.

Note:

You must not connect your phone to:
• coin-operated systems
• most electronic key telephone systems

This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. Privacy of
communications may not be ensured when using this phone.

Range

Your new phone is designed to achieve the maximum possible range by 
transmitting and receiving according to the highest specifications set 
forth by the FCC. We have rated this phone to operate at a maximum 
distance with the qualification that the range depends upon the 
environment in which the telephone is used. Many factors limit range, 
and it would be impossible to include all the variables in our rating. The 
Maximum Range rating of this phone is meant to be used as a means of 
comparison against other range claims.

ADDI

TI
ONAL

IN

F

O

R

M
A

T

IO

N

UP033BH_EXI7246C.book  39 ページ  2004年1月15日 木曜日 午前11時47分

Содержание EXI 7246 Series

















































Отзывы: