Uniden EXA2955 Скачать руководство пользователя страница 48

Страница: 48 / 56

Additional Information

Troubleshooting

If you’ve experienced any of the following difficulties while using your
phone, use this troubleshooting guide to help you remedy the problem.
Should any problem persist, call our customer hotline at 1-800-297-1023.

Symptom

You hear five short error
beeps when you press

You hear no dial tone.

The phone does not connect at
all, even though the number
you have dialed is correct.

The phone does not redial
correctly.

The handset does not ring.

The base phone does not ring.

You hear interference during
conversation.

You hear a beep every three
seconds during the
conversation.

You cannot store a memory
dialing number.

You cannot make a memory
dialing call.

Memory dialing is incorrect.

Remedy

• Make sure you have set up the base phone correctly

(page 8).

• Move the handset closer to the base phone.
• Replace the handset to the base phone for a while to

reset the random security code.

• Make sure the telephone line cord is securely

connected to the telephone outlet.

• Make sure the battery is fully charged (page 11).

• Make sure the dialing mode is set correctly (page 10).
• Before dialing, make sure you hear a dial tone.

• Make sure the last dialed number is really the one you

want to dial.

• Make sure the ringer is turned on (page 23).
• The battery may be weak. Charge the battery for 15-20

hours (page 11).

• Make sure you have set up the base phone correctly

(page 8).

• Move the handset closer to the base phone.
• Replace the handset to the base phone for a while to

reset the random security code.

• Make sure the telephone line cord is securely

connected to the telephone outlet.

• Make sure the ringer is turned on (page 24).

• Move the handset closer to the base phone.
• Place the base phone away from noise sources

(page 8).

• Press for a channel that gives better

reception.

• The battery is weak. Charge the battery for 15-20

hours.

• Make sure you follow the procedure in storing the

number correctly (page 20).

• When the handset is in use, you cannot store a memory

dialing number on the base phone.

• Replace the handset to the base phone for a while.

• You pressed the number button to which no phone

number has been stored.

• Store a correct number (page 20).

TALK

CHANNEL

Making

calls

Receiving

calls

During

conversation

Memor

dialing

EXA2955-9/21 9/21/01 4:45 PM Page 48

Содержание EXA2955

























































Результаты поиска

Содержание EXA2955

Отзывы:

Похожие инструкции для EXA2955

Бренды по названию

Популярные бренды

Uniden EXA2955, Инструкция по эксплуатации

Результаты поиска

Содержание EXA2955

Отзывы:

Похожие инструкции для EXA2955

Бренды по названию

Популярные бренды